References:
  1. Angelov G., et al. Adaptation and development of V-process in manufacturing synthetic-resin patterns, The British Foundryman, 1985, No6, 229-234.
  2. Alipiev D. Resin patterns obtained in vacuum-sealed sand moulds, Proceedings of the 5th Int'l Scientific Conference - Heavy Machinery 2005, Kraljevo, Serbia.
  3. Japanese Patent(s) 50-8409 (50-8410, 50-8411, 50-8412, 50-8413, 50-8414, 50-8415, 50-8415, 50-8417).
  4. V-process Handbuch. Heinrich Wagner Sinto Maschinenfabrik GmbH, Germany.
  5. Angelov G., et al. V-process, Sofia, 1984.
  6. Minaev A., Notkin E., Sazonov V. V-process, Moscow, 1984.
  7. Ciba-Geigy Prospect(s). Publ. No 24028 (28145, 35513, 35950, 38236), 1993.
  8. Alipiev D., Rangelov R. Mould for producing of resin patterns, Bulgarian Author's Certificate No 50636, 1990.
  9. Angelov G., et al. Method & Mould for producing of resin patterns, Bulgarian Author's Certificate No 38816, 1984.
  10. Alipiev D. Method for producing of thin-walled resin patterns, Bulgarian Patent No 48357, 1994.
  11. Alipiev D. Method for producing of shape forming equipment, Bulgarian Patent No 46031, 1994.
  12. Alipiev D. Vacuum-chamber, Bulgarian Patent No 50747, 1994.
  13. Alipiev D. Vacuum system for foundry flask, Bulgarian Author's Certificate No 50748, 1990.
  14. Summ B., Gorjunov Y. Physical-chemistry of wetting and flowing of liquids on solids, Moscow, 1976.
  15. Bulgarian Standard BDS 4035-90. Mould silica sands.
  16. Novoselets L. Epoxy resins, Sofia, 1983.
  17. Hasegawa K., Aizawa T., Watanake A. Fundamental technique of vacuum sealed moulding process, Imono, J.Japan Foundrymen's Soc., 1974, No8, 672.
  18. Watanabe T., Matsuoka K., Sataka T. Study on V-process mould, Technical Review, 1975, No3, 171-176.
  19. Kono R., Miura T. Accuracy of iron castings produced by the V-process, The British Foundryman, 1975, No3, 70-78.
  20. Gaindhar J., Jain C., Subbarathnamatah K. Prediction of Pattern Dimensions for V-process Precision Castings Through Response Surface Methodology, Trans.Amer.Foundryman's Soc., Vol.94, Proc.90th Annu.Meet., May 11-15, 1986, Des Plaines, Ill., 1986, 343-348.
  21. Zakrochimskyi V., Miroshnichenko A., Nemchenko G., Snezhnoy V. Accuracy of vacuum sealed moulds, Liteynoe proizvodstvo, 1983, No8, 16-17.
  22. BDS EN ISO 178:2002. Plastics - Determination of flexural properties.
  23. BDS EN ISO 179-1:2003. Plastics - Determination of Charpy impact properties.
  24. Bulgarian Standard BDS 9086-79. Epoxy resins.
  25. Heine H. Using Patterns Cost Effectively - Part I, Foundry Management & Technology, 1980, No6, 30-40.
  26. GOST 19505-86. Foundry resin patterns and core-boxes. Technical requirements.
  27. Golding J. Process development in plastic tooling, The British Foundryman, 1983, No1, XIII-XVI.
  28. Bailey R. The HMP System: A New Idea in Patternmaking, Modern Casting, 1983, No7, 22-23.
  29. Haug D. Verschleissuntersuchungen an verschiedenen Modellwerkstoffen, Giesserei, 1975, No8, 190 -194.
  30. Stahlhacke W. Verschleissuntersuchungen an Modellwerkstoffen, Giesserei, 1979, No10, 304-307.
  31. Stahlhacke W. Verschleissuntersuchungen an Metallischen Modellwerkstoffen, Giesserei, 1982, No10, 285-287.
  32. Maier R., Wallace J. A study on Pattern Material Wear, Modern Casting, 1978, No1, 55.
  33. Maier R., Wallace J. Pattern Material Wear or Erosion Studies and Research, Trans.Amer.Foundryman's Soc., Vol.85, Proc.81st Annu.Meet. 1977, Des Plaines, Ill., 1979, 161-166.
  34. Helzer S. Study of Pattern Material Wear By Controlled Sand Erosion, AFS Transactions, Vol.96, Proc.92nd Annu.Meet., April 24-28, 1988, Des Plaines, Ill., 1988, 279-286.
  35. Kondratiev U. Materials for pattern equipment. Liteynoe proizvodstvo, 1967, No6, 5-7.
  36. Komarov V., Korniuskin O., Yoffe M. Contact friction and wear of pattern materials in green sand moulding, Liteynoe proizvodstvo, 1986, No1, 19-20.
  37. Markon L. The wear-resistance of the pattern equipment made of epoxy resin EDS, Liteynoe proizvodstvo, 1982, No5, 21.
  38. Bulgarian Standard BDS 1173-75. Foundry and moulding sand. Sampling and methods of laboratory testing.
  39. EN 12890:2000. Patterns, pattern equipment and core boxes for the production of sand moulds and sand cores.
  40. GOST 11961-87. Accuracy of pattern equipment.
  41. Rosiwal A. On Geometric Rock Analysis. A Simple Surface Measurement to Determine the Quantitative Content of the Mineral Constituents of a Stony Aggregate, Verhandl. K.K. Geol. Reich., 1898, 143.
  42. Saltykov S. Stereometric Metallography, Moscow, 1976.

Literature (265), classified by years