ABSTRACTS
2000
Semi-solid forming applications: high volume automotive products
W.L.Winterbottom, Technology
Group, AEMP Corporation, Jackson, Tennessee, USA
SSM (semi-solid metal) technological alternatives for different applications
K.Young, Vforge
Inc., Denver, Colorado, USA
P.Eisen, Idra-Presse S.p.A., Brescia, Italy
The optimized tensile and fatigue properties of electromagnetically stirred and thermally transformed
semi-solid 357 and modified 319 aluminum alloys
S.C.Bergsma, Northwest Aluminum Company, The Dalles, USA
M.E.Kassner,
Department of Mechanical Engineering, Oregon State University, Corvallis, USA
E.Evangelista, Dipartimento di Meccanica, Universita
di Ancona, Ancona, Italy
E.Cerri, Universita di Lecce, Italy
Liquid hot isostatic pressing process to improve properties of thixoformed parts
M.Rosso, Material
Science Department, Politecnico di Torino, Italy
C.Mus, Teksid S.p.A., Borgaretto, Torino, Italy
G.Chiarmetta, Teksid S.p.A.,
Cascine Vica, Torino, Italy
Fatigue properties of a semi-solid cast Al-7Si-0.3Mg-T6 alloy
C.J.Davidson, J.R.Griffiths, CSIRO
Manufacturing Science and Technology, Kenmore, Australia
M.Badiali, A.Zanada, Teksid S.p.A. Divisione Alluminio, Carmagnola,
Torino, Italy
Viscosity of semi-solid A357 alloy in the transient high shear rate regime
A.M. de Figueredo,
A.Kato, M.C.Flemings, Department of Material Science and Engineering, MIT, USA
Aluminum properties, a model for calculating mechanical properties in AISiMgFc-foundry alloys
S.Brusethaug, Hydro Aluminium, R&D Materials Technology, Sunndalsera, Norway
Y.Langsrud, Hydro Raufoss Automotive Structures,
Raufoss, Norway
Use of gamma titanium aluminide for automotive engine valves
D.Chandley, Metal Casting Technology,
Inc., USA
Mechanical behaviour of 6082-T6 aluminium alloy welds
S.Missori, Dipartimento Ingegneria Meccanica,
Universita di Roma, Tor Vergata, Italy
A.Sili, Dipartimento Chimica Industriale e Ingegneria dei Materiali, Universita di Messina,
Italy
Thixoforming of aluminium alloy for weight saving of a suspension steering knuckle
A.Fuganti,
Centra Ricerche Fiat, Chassis & Body Design Dept., Italy
G.Cupito, Centra Ricerche Fiat, Advanced Process Technologies Dept.,
Italy
Development of mixed (ferrito-ausferritic) structures for spheroidal graphite irons
D.Rousiere,
Research & Development Department, Teksid France, France
J.Aranzabal, Metallic Materials Department, Fundacion Inasmet, Spain
2001
Origin of the Liquid Hot Isostatic Pressing process
D.Chandley, Hitchiner Mfg. Co., Inc., USA
Microstructural and mechanical effects of Liquid Hot Isostatic Pressing on AA356 samples. I.
M.E.Beghi, C.Caglioti, Dipartimento di Ingegneria Nucleare, Politecnico di Milano, Italy
S.Barone, C.Mus, Teksid S.p.A.,
Borgaretto, Torino, Italy
Microstructural effect of the L.H.I.P. process on the A356 aluminium alloy
M.Cabibbo,
E.Evangelista, Dipartimento di Meccanica, Universita di Ancona, Ancona, Italy
Reasons to develop Liquid Hot Isostatic Pressing
S.Gallo, C.Mus, Teksid S.p.A., Borgaretto,
Torino, Italy
G.Mortari, Idra, Brescia, Italy
The effect of Liquid Hot Isostatic Pressing on fatigue properties of Al based castings
E.Romano,
M.Rosso, Politecnico di Torino, Italy
C.Mus, Teksid S.p.A., Borgaretto, Torino, Italy
Properties improvement of thixoformed parts by Liquid Hot Isostatic Pressing process
M.Rosso,
E.Romano, Politecnico di Torino, Italy
S.Barone, Teksid S.p.A., Borgaretto, Torino, Italy
2002
Fatigue properties of a cast aluminium alloy for rims of car wheels
C.Bosi, G.L.Garagnani,
R.Tovo, Dipartimento di Ingegneria, Universita degli Studi di Ferrara, Italy
Correct management of inclusional defect based on a failure analysis
M.Cusolito, Rodacciai
S.p.A.
C.Mapelli, W.Nicodemi, Dipartimento di Meccanica, Politecnico di Milano
Mechanical and microstructural characterisation of an aluminum friction stir-welded butt joint
M. Di Paola, A.Falchero, Innovazione Tecnologica, Alenia Aeronautica, Torino, Italy
M.Cabibbo, E.Evangelista, E.Meccia and
S.Spigarelli, INFM/Department of Mechanics, University of Ancona, Ancona, Italy
Application of a neural network for an improved control of the metallurgical process
C.Mapelli, M.Morotti, W.Nicodemi, Dipartimento di Meccanica of Politecnico di Milano
Dynamic solidification of sand-cast aluminium alloys
P.Appendino, Politecnico di Torino -
Dipartimento di Scienza dei Materiali ed Ing. Chimica, Torino
G.Crivellone, C.Mus, Teksid Aluminium S.p.A., Via Umberto II,
3/5-Carmagnola
S.Spriano, Politecnico di Torino, Dipartimento di Scienza dei Materiali ed Ing. Chimica, Torino
Two level fatigue loading (H-L) of Mg alloys: micromechanic modeling vs. experiments
E.Altus,
Z.Gerstman, A.Golubchick, Faculty of Mechanical Engineering, Technion, Israel Institute of Technology, Haifa, 32000 Israel
Static and fatigue strength of a die cast aluminium alloy under different feeding conditions
M.Avalle, G.Belingardi, M.P.Cavatorta, Department of Mechanical Engineering, Politecnico di Torino, Torino, Italy
Process simulation of microstructure and relationship with mechanical properties in diecastings
C.Badini, Politecnico di Torino, Dipartimento di Scienza dei Materiali e Ingegneria Chimica
F.Bonollo, Universita di Padova,
sede di Vicenza, DIMEG
M.P.Cavatorta, Politecnico di Torino, Dipartimento di Meccanica
G.M La Vecchia, A.Panvini, A.Pola,
Universita di Brescia, Dipartimento di Ingegneria Meccanica
W.Nicodemi, M.Vedani, Politecnico di Milano, Dipartimento di Meccanica
Mechanical and microstructural properties of 8090 Al-Li alloy welded joints
S.Missori,
Dipartimento Ingegneria Meccanica, Universita di Roma, Tor Vergata
A.Sili, Dipartimento Chimica Industriale e Ingegneria dei
Materiali, Universita di Messina
Gas evolution from resin-bonded sand cores prepared by various processes
B.Zhang, M.Garro,
D.Chautard, Piattaforma Colata a Gravita, Teksid Aluminium S.p.A., Carmagnola, Torino, Italy
C.Tagliano, Stabilimento Conchiglia
Carmagnola, Teksid Aluminium S.p.A., Carmagnola, Torino, Italy
2003
Dendrite arm spacing in aluminium alloy cylinder heads produced by gravity semi-permanent mold
B.Zhang, M.Garro, Piattaforma Colata a Gravita, Teksid Aluminum S.r.l., Carmagnola, Torino, Italy
C.Tagliano, Stabilimento
Conchiglia di Carmagnola, Teksid Aluminium S.r.l., Carmagnola, Torino, Italy
Commercial development of the semi-solid rheocasting (SSR™) process
James A. Yurko, Idra
Casting Machines
Raul A. Martinex, Merton C. Flemings, Massachusetts Institute of Technology
Toughness characteristics of as-die-cast AM60B alloy
E.Gariboldi, A. Lo Conte, Politecnico
of Milano, Dipartimento di meccanica
Anomalous hardness behaviour of high pressure die-cast Mg-Al alloys
A.L.Bowles, C.H.Caceres,
Co-operative Research Centre for Cast Metals Manufacturing (CAST), Division of Materials Engineering, School of Engineering,
The
University of Queensland, Brisbane, QLD 4072 Australia
Silicon particle damage in a thixocast A356 aluminium alloy
P.Leo, E.Cerri, INFM - Innovation
Engineering Department, University of Lecce, Via per Arnesano, 73100, Lecce, Italy
Experimental aspects related to equal channel angular pressing of a commercial AA6082 alloy
M.Vedani, P.Bassani, Politecnico di Milano, Dipartimento di Meccanica, I-20133, Milano, Italy
M.Cabibbo, V.Latini,
E.Evangelista, INFM, Universita di Ancona, Dipartimento di Meccanica, I-60131, Ancona, Italy
An investigation of preload relaxation behaviour of three Zinc-Aluminium alloys
A.A.Mir,
School of Mechanical Engineering, University of Leeds, Leeds LS2 9JT, UK
Liquid Hot Isostatic Pressing of QE22A magnesium alloy: a preliminary test
M.G.Beghi,
G.Caglioti, Dipartimento di Ingegneria Nucleare, Politecnico di Milano, Italy, and INFM - CNR, Milano, Italy
V.Carvelli, C.Poggi,
Dipartimento di Ingegneria Strutturale, Politecnico di Milano, Italy
Hot extrusion experiments performed on Ti-6Al-4V for the production of special cross sections
R.Bergamini, Production Director of FIAV L.Mazzacchera, Via S. Faustino 62, 20134 Milano, Italy
C.Mapelli, R.Venturini,
Politecnico di Milano, Dipartimento di Meccanica, Via La Masa 34, 20158 Milano, Italy
Laser Beam Welding of cast commercial pure Titanium
S.Missori, Dipartimento di Ingegneria
Meccanica Universita di Roma-Tor Vergata, Italy
F.Murdolo, A.Sili, Dipartimento di Chimica Industriale e Ingegneria del Materiali
Universita di Messina, Italy
2004
Evaluation of hot formability of an Al-4.6Zn-0.8Mg alloy by increasing-strain-rate torsion tests
M.El Mehtedi, S.Spigarelli, E.Evangelista, INFM/Dipartimento di Meccanica, Universita Politecnica delle Marche, Ancona, Italy
N.Ryum, B.Ronning, Department of Materials Technology and Electrochemistry, NTNU, Trondheim, Norway
A review on the fluidity of Al based alloys
M. Di Sabatino, L.Arnberg, Norwegian University
of Science and Technology, Department of Materials Technology, Trondheim, Norway
Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die
casting
C.Dour, Ecole des Mines d'Albi-Carmaux, Albi Cedex, France
M.Dargusch, C.Davidson, D. St John, CRC for Cast
Metals Manufacturing (CAST), The University of Qld, St Lucia, Qld, Australia
A.Nef, Ferra Engineering Pty. Ltd., Tingalpa, Qld,
Australia
The influence of plasma nitriding and post oxidising treatment on the resistance of AlSi H11 to cycling
immersion in molten aluminium alloy
D.Ugucs, M.Rosso, Politecnico di Torino - Sede di Alessandria, Italy
M.Albertinazzi,
Teksid Aluminum, Carmagnola, Torino, Italy
|
